# Proxy mode¶

The tezos-client described here forwards all RPCs to a node. This page describes the proxy mode, a mode where the client performs protocol RPCs locally. For the computations to be correct, the proxy client requests the data it needs from the node, and uses this data locally to perform its own computations (see the mockup mode for an entirely local mode).

This mode’s purpose is to relieve the node from some long computations when estimating gas or asking for baking rights for instance.

## Executing commands in proxy mode¶

The CLI interface of the client in proxy mode (the proxy client in short) is the same as the default client. To turn proxy mode ON, pass --mode proxy to tezos-client.

Because computations done locally are protocol dependent, the proxy mode does not support all protocols. At the time of writing it supports the following protocols:

• ProtoGenesisGenesisGenesisGenesisGenesisGenesk612im

• PtEdo2ZkT9oKpimTah6x2embF25oss54njMuPzkJTEi5RqfdZFA

• ProtoALphaALphaALphaALphaALphaALphaALphaALphaDdp3zK

If --protocol is omitted when calling the proxy client, it tries to match the node’s protocol. On the one hand, this is handy when testing. On the other hand, in a production environment, it is recommended to specify --protocol if the protocol is known, to avoid an extra RPC at every call tezos-client --mode proxy ...

## Examples with the sandbox¶

In this section, we show examples of usage of the proxy mode when using the sandboxed node. For convenience we repeat instructions for the sandboxed mode here, but refer the reader to the sandboxed mode page for further details. In a terminal, start a sandboxed node:

$./src/bin_node/tezos-sandboxed-node.sh 1 --connections 1  Leave that terminal running, in another terminal, prepare the appropriate environment for using the proxy client: $ eval ./src/bin_client/tezos-init-sandboxed-client.sh 1


Then upgrade the node to protocol alpha:

$tezos-activate-alpha$ tezos-client bake for bootstrap1


To avoid warnings being printed in upcoming commands (optional):

$export TEZOS_CLIENT_UNSAFE_DISABLE_DISCLAIMER=y  You’re now ready to use the proxy client. For example, request baking rights: $ tezos-client --mode proxy rpc get /chains/main/blocks/head/helpers/baking_rights
protocol of proxy unspecified, using the node's protocol: ProtoALphaALphaALphaALphaALphaALphaALphaALphaDdp3zK
[ { "level": 3, "delegate": "tz1KqTpEZ7Yob7QbPE4Hy4Wo8fHG8LhKxZSx",
"priority": 0, "estimated_time": "2020-07-01T08:47:21Z" },
{ "level": 3, "delegate": "tz1b7tUupMgCNw2cCLpKTkSD1NZzB5TkP2sv",
"priority": 2, "estimated_time": "2020-07-01T08:47:21Z" },
{ "level": 3, "delegate": "tz1faswCTDciRzE4oJ9jn2Vm2dvjeyA9fUzU",
"priority": 5, "estimated_time": "2020-07-01T08:47:21Z" },
{ "level": 3, "delegate": "tz1gjaF81ZRRvdzjobyfVNsAeSC6PScjfQwN",
"priority": 7, "estimated_time": "2020-07-01T08:47:21Z" },
{ "level": 3, "delegate": "tz1ddb9NMYHZi5UzPdzTZMYQQZoMub195zgv",
"priority": 10, "estimated_time": "2020-07-01T08:47:21Z" } ]


Well that doesn’t seem very different from what the default client would return. Indeed, it’s the same; that was the point! To see what the proxy client is doing differently, you may use three debug variables:

• proxy_rpc_ctxt shows whether the proxy client is delegating RPCs to the node or doing them locally. This is the main debug variable.

• PROTO.proxy_rpc shows the RPCs that the proxy client is performing to retrieve up-to-date data from the node. This debug variable is useful to understand if the proxy is performing slowly. It might be because it is performing a lot of such RPCs.

This variable is dependent on the protocol being used. Replace PROTO by one of these values: genesis, or alpha.

• proxy_context shows low-level detail implementations of the client, you likely do not need it.

For convenience, let’s define an alias before continuing, to save keystrokes and the protocol of proxy unspecified warning:

$alias proxy-client="tezos-client --mode proxy --protocol ProtoALphaALphaALphaALphaALphaALphaALphaALphaDdp3zK"  Now configure proxy_rpc_ctxt to have more information: $ export TEZOS_LOG="proxy_rpc_ctxt->debug"


And redo the same RPC as before:

\$ proxy-client rpc get /chains/main/blocks/head/helpers/baking_rights
Aug 18 12:05:29.624 - proxy_rpc_ctxt: Delegating call_service GET version to http
Aug 18 12:05:29.625 - proxy_rpc_ctxt: Delegating call_service GET chains/<chain_id>/blocks/<block_id>/protocols to http
Aug 18 12:05:29.629 - proxy_rpc_ctxt: Done call_service GET describe/<string> locally
Aug 18 12:05:29.841 - proxy_rpc_ctxt: Done generic_json_call GET /chains/main/blocks/head/helpers/baking_rights locally
[ { "level": 3, "delegate": "tz1KqTpEZ7Yob7QbPE4Hy4Wo8fHG8LhKxZSx",
"priority": 0, "estimated_time": "2020-08-18T09:58:20Z" },
{ "level": 3, "delegate": "tz1b7tUupMgCNw2cCLpKTkSD1NZzB5TkP2sv",
"priority  ": 2, "estimated_time": "2020-08-18T09:58:20Z" },
{ "level": 3, "delegate": "tz1faswCTDciRzE4oJ9jn2Vm2dvjeyA9fUzU",
"priority": 5, "estimated_time": "2020-08-18T09:58:20Z" },
{ "level": 3, "delegate": "tz1gjaF81ZRRvdzjobyfVNsAeSC6PScjfQwN",
"priority": 7, "estimated_time": "2020-08-18T09:58:20Z" },
{ "level": 3, "delegate": "tz1ddb9NMYHZi5UzPdzTZMYQQZoMub195zgv",
"priority": 10, "estimated_time": "2020-08-18T09:58:20Z" } ]


In this case, the bulk of the computation is done locally.

## How to deploy to relieve nodes from some RPCs¶

Using proxy clients can reduce the load of nodes, by having clients perform more computations locally. For this to work, however, deployment should be done in a specific manner, which this section describes.

While the proxy mode has been designed to reduce the load of nodes, it doesn’t suffice on its own to achieve this goal. Because proxy clients perform many calls to the /chains/<chain>/blocks/<block>/context/raw/bytes/ RPC (and because the payload of doing an RPC call is a bit too high at the moment), the node’s load doesn’t decrease. It pretty much stays the same: for example, when benchmarking the time spent honoring rpc get /chains/main/blocks/head/helpers/baking_rights?&all=true, a node serving proxy clients spends its time serving ../raw/bytes instead of serving ../baking_rights?&all=true.

To reduce the load of a node in presence of proxy clients, deployment should be done as follows (we suppose there’s a single node for simplicity):

• Deploy the node as usual

• In front of the node, put multiple HTTP caches (I’m not using the term proxy here, to disambiguate with the proxy client) that cache the following RPCs:

• /chains/<chain>/blocks/<block_id>/context/raw/bytes/

• /chains/<chain>/blocks/<block_id>/protocols

• /chains/<chain>/blocks/<block_id>/header

Intercepting ../raw/bytes is required because proxy clients call it a lot, as described above.

Intercepting ../protocols is recommended, because the proxy client calls this RPC when it starts, to check the protocol it uses matches the node’s protocol (recall that proxy clients are protocol-specific).

Finally, intercepting ../header is recommended, because the proxy client calls this RPC when it starts honoring a request locally, i.e. when it starts performing a computation that would happen on the node with a regular client.

It is safe to cache these three RPCs, because the corresponding data is immutable (if it’s there it won’t change in the future).

Regarding clients, either:

• Use proxy clients

• Or intercept request of regular clients, and honor them by spawning proxy clients on the fly, in front of the setup described in the previous list.

We refer to the proxy mode’s merge request for details regarding how we did the benchmarks that led us to the conclusions of this section.